- 专业翻译公司
-
机械安装翻译-中译英
Unitrans世联
机械翻译当中，有很多安装说明是需要翻译的，以下就是世联北京翻译公司资深译员对加热器机械安装说明翻译。1、加热器应水平安装，并且要安装牢固。并注意适当的保护。电器部件应朝向加热器舱体外，以便利于加热器的维修，保养。同时，要保证加热器的助燃空气进气充分，以便加热器能正常工作。
加热器的安装
1611T5043E0-3EK border=0>
Install
The heater should be securely installed horizontally. Protection should be available wherever it is necessary. Electric components should face outward of the heater housing to facilitate repair and maintenance. In addition, sufficient combustion air should be supplied to the heater; otherwise, the heater may not operate normally.
The oil drop pipe and the exhaust pipe of the heater should extrude outside of the installation housing of the heater. Do not block the exhaust path. Generally no extension should be used on the exhaust pipe; otherwise, the heater may suffer from insufficient combustion due to the increased exhausting resistance.
The heater may source its fuel from the main fuel tank on the vehicle, or, alternatively from the fuel tank included in the configuration. For main tank supply, the fuel intake circuit should be independent from the fuel pipes for other equipments on the vehicle. The fuel pipes should be φ6×1 copper pipes or CHINAUST pipes equipped with standard M12×1.25 taper joints. The joints should be securely fixed with air tightness. The fuel surface in the tank should be no lower than the heater center by 400mm or more. The oil-intake joint of the heater oil filter solenoid should be within 8m away from the tank (i.e., the fuel pipe length). Due to the long oil circuit, it may take a long time for the heater to start for the first time. You should wait 3 or 4 minutes. If the heater is not started after that, please shut down the heater and restart it.
